How ToLife Hacks

Clean The Ceramic Tile Shower Is No Longer Hard With These Following Steps

Source :

Last time, i already give you a suggestion on how to clean shower with fiberglass and stone materials. Further, those two is not the only types of shower that can be seen on this country. There another types of shower that can often founded also, which is Ceramic Tile Shower.

Then, this article will discuss on how to clean shower with ceramic materials. Therefore, ceramic tile shower needs special treatment on how to clean it, because there are a possibility of grout insides the shower. Moreover, grout is not the only one treat the faces on how to clean shower with ceramic materials. There are spore possibility that you should be aware of it.


  • Commercial shower and grout cleaner or a homemade solution of 1/2 cup distilled white vinegar, 1/2 cup ammonia, and 3 quarts of hot water in a spray bottle
  • Chlorine bleach
  • Sponge or plastic mesh scrubber
  • Rubber gloves
  • Soft-bristled brush or old toothbrush
  • Squeegee

01. Make A Sure That The Shower Is Empty Before

Source :

The first step on how to clean shower in all types of shower is the same, that is make a sure that your shower is empty. Because, the shower will be easier to clean when you remove all of the shampoo bottles, soap, razors, and etc. You need to wipe down all of those items with a cloth dipped in hot water to remove any sticky messes. Therefore, the excessive rain on the drain should be maintained also.

02. Maintain the walls

Source :

The next steps is create an air circulation during cleaning process to make it the shower dry quickly. Turn on the bathroom fan, open the bathroom door, or any window over it to create an airflow on your bedroom.

03. Remove Any Mildew

Source :

Ceramic is the potential place for mildew appearing. Then, tackle it first before to make it easier. Mix a solution of one part chlorine bleach and two parts water to create a magic liquid to decrease the mildew. Use a rubber gloves, apply the solution to the mildewed spot with a sponge. Then, left it around ten minutes to make mildew’s work. Rib them with a brush for the entailment mildewed spot. Rinse them with hot water then move to the next step.

04. Apply The Cleaner To The Stained Spot

Source :

The next steps is spray your cleaner product on the stained spot, on the walls, and floor of the shower. After that let them works in 10 minutes or more to make them break apart the soap scum and soil the stained spot.

05. Scrub And Rinse The Spot

Source :

After apply the cleaner to the spot. Then, you need to scrub it to maximize their works. you may use sponge or soft brush to this steps easier. In the other hand, remember you don’t have to use metal scrubber or hard-bristled brush to avoid of scratched area on the ceramic surface. Rinse them with clean water to affected the stain.

06. Clean And Dry It

Source :

The last steps is remove any water from every surface of the ceramic, then if you skip this steps many water spots will be occurred.

In short, all of steps come to make your cleaning shower process easier. If there is something work on your shower after following these steps, you need to call the experts. have a great day!

You may also like

Leave a reply

Your email address will not be published. Required fields are marked *

More in How To